{
  "physical_measurements": 0,
  "classification": "HALF_SCALE_LOW_FORCE_GEOMETRY_JIG_ASSEMBLY_ENVELOPE",
  "scale": 0.5,
  "shown_camber_deg": -2.0,
  "shown_travel_m": 0,
  "cad": "cryopulse-p39/cad/p39-half-scale-camber-jig.step",
  "cad_sha256": "ac0c99ebb2179b4e51036b913c8494de30633cf13fbad309a98f2908ee56247a",
  "nominal_upper_link_length_m": 0.20476580757198887,
  "full_scale_linkage_source": "active_chassis.py",
  "parts": [
    "fixture",
    "lower_link",
    "upright",
    "actuator_housing",
    "actuator_rod",
    "pivot_0",
    "pivot_1",
    "pivot_2",
    "pivot_3",
    "dummy_tyre",
    "hub",
    "dummy_rim"
  ],
  "limits": [
    "Assembly-envelope geometry only. No threads, seals, bearing seats, tolerances, fasteners, guarding, force source or production actuator selected.",
    "A dummy wheel is used. No similarity law or tyre-grip result is assigned to this half-scale jig.",
    "Fixture and actuator housings are preliminary volumes, not load-qualified parts.",
    "The main car CAD and this low-force geometry jig are separate design artifacts."
  ]
}