{
  "physical_measurements": 0,
  "classification": "DIMENSIONED_LOAD_TRAVEL_AND_COMMAND_RATE_REQUIREMENT",
  "camber_design_moment_Nm": 6000.0,
  "steering_design_moment_Nm_each": 600.0,
  "camber_min_Jacobian_m_rad": 0.2942039772357852,
  "steering_min_Jacobian_m_rad": 0.09258575233983544,
  "camber_cylinder_peak_force_N": 20394.013895982764,
  "steering_cylinder_peak_force_N": 6480.478743616011,
  "required_camber_pressure_Pa": 12489882.13960735,
  "required_steering_pressure_Pa": 10743752.350504622,
  "rated_force_margin": 2.4019442028892617,
  "hardware_mass_budget_kg": 60,
  "simultaneous_command_test": {
    "enabled": true,
    "cold_enabled": false,
    "elapsed_drive_s": 1.0000000000000007,
    "coolant_after_preparation_kg": 0.0,
    "coolant_remaining_kg": 0.0,
    "finite_warm_air_remaining_kg": 0.0,
    "service_gross_DC_J": 2633.7934371757287,
    "generated_DC_accepted_J": 0.0,
    "generated_DC_dumped_J": 0.0,
    "camber_motion_DC_J": 2513.793437175726,
    "cold_aux_DC_J": 0.0,
    "net_service_pack_draw_J": 2633.7934371757287,
    "peak_service_gross_W": 11637.908282853683,
    "peak_camber_tracking_error_deg": 1.99,
    "peak_hydraulic_flow_m3_s": 0.0005833333224255378,
    "hydraulic_travel_violation": false,
    "cold_bath_heat_J": 0.0,
    "cold_boiloff_during_drive_kg": 0.0,
    "warm_heat_input_J": 0.0,
    "no_extra_tyre_grip_assigned": true,
    "physical_measurements": 0
  },
  "peak_motion_motor_and_valve_W": 11517.908282853683,
  "gates": {
    "camber_travel": true,
    "toe_travel": true,
    "working_camber_pressure": true,
    "working_steering_pressure": true,
    "rated_force_margin_at_least_2": true,
    "pump_flow": true,
    "motor_power": true,
    "mass_budget": true
  },
  "all_design_gates_pass": true,
  "limits": [
    "The 6 kNm camber and 600 Nm steering moments are explicit sizing loads, not measured wheel loads.",
    "Guide rails react fore/aft and vertical loads; cylinder force is calculated from the lateral carriage Jacobian.",
    "Pressure rating margin is a hydraulic force margin. It does not replace guide, joint, seal, fatigue or complete structural qualification."
  ]
}