{"status":"PASSED_COMPUTATIONAL_REQUIREMENTS_SCREEN","physical_measurements":0,"checks":{"continuous_launch_and_stop":true,"nine_standard_cases":true,"eighteen_additional_sampled_cases":true,"all_mechanical_electrical_ledgers":true,"same_finite_energy_windows":true,"pack_current_voltage_temperature":true,"consumer_bus_below_310kW":true,"original_3MW_brake_limit":true,"floor_requests_attainable_in_assumed_map":true,"floor_motor_catalogue_continuous_power_torque_and_speed_ceiling":true,"floor_motor_startup_peak_ceiling":true,"thermal_first_and_second_laws":true,"same_six_kg_nitrogen":true,"mass_ledger_closes":true,"blower_mass_budget_has_margin":true,"sampled_deck_clearances":true,"half_timestep_stop_within_0p1m":true,"half_timestep_0_400_within_1ms":true,"speed_modes_carry_stores_and_pay_controls":true,"all_four_improve_P41":true},"selected_performance":{"0_100_s":1.9586722494828093,"0_400_s":26.210788425142876,"400_0_m":437.04619341568997,"0_400_0_s":33.475000000009814},"P41_comparison":{"0_100_s":1.97741308343841,"0_400_s":26.28545593336338,"400_0_m":445.5037500245195,"0_400_0_s":33.77100000000998},"improvement_over_P41_percent":{"0_100_s":0.9477450165856771,"0_400_s":0.28406396453535265,"400_0_m":1.898425458453279,"0_400_0_s":0.8764916644460441},"mass_kg":2744.3824000000004,"mass_reduction_from_P41_kg":46.40719999999965,"mass_ledger":[{"component":"Reference vehicle","mass_kg":1995.0},{"component":"Inherited hardware, excluding identified 40 kg floor machinery","mass_kg":230.0},{"component":"216s9p pack with 35% overhead","mass_kg":186.3324},{"component":"Inherited later machines and controls","mass_kg":55.0},{"component":"Common-shaft floor machinery budget","mass_kg":80.0},{"component":"Open-nitrogen stage dry hardware","mass_kg":55.0},{"component":"Maximum liquid nitrogen","mass_kg":6.0},{"component":"Hold-up mass margin","mass_kg":0.05},{"component":"Full traction module, reduction and installation budget","mass_kg":125.0},{"component":"Broader pressure deck and carrier addition","mass_kg":12.0}],"same_fitted_engine_curve":true,"same_tyre_law":true,"new_body_CFD_credit":0,"half_step_stop_difference_m":0.04907847558274625,"half_step_0_400_difference_s":-0.00011063664857857702,"floor_area_gain_percent":24.886674279386845,"floor_perimeter_increase_percent":4.324324324324325,"interpretation":"A more explicit, conditional digital prototype: component mass, catalogue ceilings, rotational inertia, startup and finite stores are counted. Catalogue ceilings do not prove installed maps. CdA, tyre/seal/fan curves, cell resistance across the working window, cooling, structures and full-vehicle packaging remain qualification requirements."}